Instrument name | NTD (State Standard) | Diapason dimension in mm. | Estimated Cost c.u. without VAT ( 1 c.u. = 1 EURO ) |
BROACHING AND PIERCING |
| ГОСТ20364-74
ГОСТ20365-74
Customer?s drawings
| Ф 10-Ф200
Length up to 1650
| Ф15x400 - 67.5
Ф30x750 - 225
Ф80x1350-1260 |
2. | Straight-sided splinе broaching with centering on external and internal diameters |
| ГОСТ24818-81-
ГОСТ24823-81
ГОСТ25969-83
ГОСТ25974-83
Customer's drawings
| Ф10-Ф200:
Number of splines 2-16;
The length- up to 1650
| Ф15x400 - 135
Ф30x750 - 270
Ф80x1350-1455 |
| ГОСТ25157-82-
ГОСТ25161-82
Customer's drawings
| Ф10-Ф200:
M=0,5-M=5;
The length up to 1650
Ф10-Ф200;
| Ф15x400 - 85.5
Ф30x750 - 285
Ф80x1350-1575 |
4. | Serration spline broaches |
| Customer's drawings | The length up to 1650 | Ф30x750 - 307.5 |
5. | Quadratic, hexagon, polyhedral broaches |
| ГОСТ26478-85-
ГОСТ26480-85
Customer's drawings
| Side qd.or hex.10-60;
The length up to 1650
| S12x400 - 55
S27x750 - 185
S60x1350-980 |
| ГОСТ18217-90-
ГОСТ18220-90
Customer's drawings
| Channel width 3-50;
Length up to 1500
| 6x400 - 60
12x750 - 171
30x1350-750 |
7. | Rectangular and plane broaches |
| Customer's drawings | Thickness 15-140;
Height 25-90;
Length up to 1200
| 20x30x400-127.5
30x40x800-345
70x80x1200-1410 |
|
GEAR CUTTING RAMS Disk Type |
8. | Fair rams fine module classes of
accuracy A and B |
| ГОСТ10059-80
Customer's drawings
| Do=63;M=0.3M=0.9
Do=40;M=0.3-M=0.9
| 78-81
64.5-67.5 |
9. | Fair rams classes of accuracy
A and B
|
| ГОСТ9323-79
Customer's drawings
| Do=80; M=1-M=6
Do=100; M=1-M=10
Do=125; M=2-M=10 | 55-76
82.5-157.5
145.5-225 |
10. | Fair rams for spline connections with evolvent profile of classes of accuracy A and B |
| ГОСТ6762-79
Customer's drawings
| Do=80; M=0.5-M=7
Do=100; M=1-M=10
Do=125; M=1-M=10 | 82.5-114
120-157.5
145.5-225 |
11. | With profile under the shiver classes of A and B accuracy:
- with changed angle
- with a barbel on lug profile
|
| Customer?s drawings | Do=80,100,125;M=1-M=2,75
Do=80,100,125;M=3-M=6,5 | 90-120
97.5-153 |
12. | Obliquespur of classes of accuracy A and B |
| ГОСТ9323-79
Customer?s drawings
| Do=80,100,125
M=2 - M=8 | 68.5-180 |
13. | Soaking classes of accuracy
A and B
|
| Customer?s drawings | Do=80,100,125
24-3
| 97.5-157.5 |
14. | With structure under grinding of classes of accuracy А and В |
| Customer's drawing | Do=80,100,125
M=1.5,-M=6
| 90-135 |
|
Pan Type |
15. | Fair classes of accuracy A and B |
| ГОСТ9323-79
Customer?s drawings
| Do=50; M=1 - M=5
Do=80; M=1 - M=8
Do=100; M=1 - M=10
Do=125; M=1 - M=10 | 78 - 90
97.5 - 112.5
120 - 157.5
165 - 202.5 |
16. | Fair for spline connections with evolvent profile classes of accuracy A and B |
| ГОСТ6762-79
Customer?s drawings
| Do=50; M=0,5 - M=5
Do=80; M=0,5 - M=8
Do=100; M=1 - M=10
Do=125; M=1 - M=10 | 78 - 90
97.5 - 112.5
120 - 157.5
165 - 202.5 |
17. | Soaking classes of accuracy
A and B
|
| Customer?s drawings | Do=80,100,125
24-3
| 105-172.5 |
|
Shank Type |
18. | Fair fine module classes of accuracy A and B |
| ГОСТ10059-80
Customer?s drawings
| Do=12; M=0,3 - M=0,5
Do=16; M=0,3 - M=0,8
Do=25; M=0,3 - M=0,9 | 67.5-72
72-75
75-78 |
19. | Fair classes of accuracy A and B |
| ГОСТ9323-79
Customer?s drawings
| Do=25; M=1 - M=3
Do=38; M=1 - M=4 | 78-82.5
82.5-90 |
20. | Fair for spline connections with evolvent profile of classes of accuracy A and B |
| ГОСТ6762-79
Customer?s drawings
| Do=50; M=0,5 - M=5
Do=80; M=0,5 - M=8
Do=100; M=1 - M=10
Do=125; M=1 - M=10 | 72-81
82.5-105
112.5-157.5
172.5-202.5 |
21. | Soaking classes of accuracy
A and B
|
| Customer?s drawings | Do=25;sk.24-9
Do=38;sk.24-5
| 81-97.5
85.5-102 |
|
HOBS |
22. | Fair for cylindrical gear wheels of classes of accuracy A, B, C types of 1 and 2 |
| ГОСТ9324-80
Customer?s drawings
| M=1- M=2.75;
M=3.0 - M=8.0;
M=9.0 - M=16; | 102-144
147-645
750-1800 |
23. | With the profile under the shiver of classes of accuracy A, B, C
- with a barbel on lug profile
-with flank and barbel
|
| Customer?s drawings
Customer?s drawings
| M=1 - M=10;
M=1 - M=10; | 112.5-1200
120-1350 |
24. | Fair for spline shafts with evolvent profile of classes of accuracy
A,B,C
|
| ГОСТ6637-80
Customer?s drawings
| M=1 - M=2.5;
M=3 - M=8.0;
M=9 - M=16; | 102-144
147-645
750-1800 |
25. | For spline shafts with
straight-sided spline profile of classes A, B, C type of 1 and 2
|
| ГОСТ 8027-86
Customer?s drawings
| 6x16x20 - 20x112x125 | 130.5-645 |
26. | For sprockets of classes of accuracy B and C |
| ГОСТ15127-83
Customer?s drawings
| t=6,35 - t=50,8 | 157.5-1350 |
|
FRONTAL NOZZLED MILLERS |
27. | Fine lugs with intercalated blades equipped with platens from solid material BK8 |
| ГОСТ9473-80 | Ф250
Ф315
| 112.5
198 |
28. | With intercalated blades equipped platens |
| ГОСТ24359-80 | Ф125
Ф160
Ф200
| 37.5
60
67.5 |
29. | Reserve blades:
BK8
BK8
T5K10
T5K10
|
| ГОСТ9473-80
ГОСТ9473-80
ГОСТ24359-80
ГОСТ24359-80
| Для Ф250 N0015;N0016
для Ф315,Ф400
N0017;N0018
дляФ100 N0001;
дляФ125-Ф200
N0003;N0004
| 1,575
1,74
0,975
1.08 |
|
LATHE CHISELS |
30. | Through-pass blunts
T5K10,
T15K6,BK8
|
| ГОСТ18878-73 | 20x12;
25x16;
32x20 | 1,875
2.52
3.78 |
31. | Through-pass stubborn blunts
T5K10, T15K6, BK8
|
| ГОСТ18879-73 | 20x12;
25x16;
32x20 | 1,71
2.25
3.45 |
32. | Cutoffs 2
T5K10, T15K6, BK8
|
| ГОСТ18884-73 | 20x12;
25x16;
32x20 | 1,5
2.205
3,0 |
33. | Boring for handling open-ended holes of cutoffs 1 of 1 type
T5K10, T15K6, BK8
|
| ГОСТ 18882-73 | 16x16;
20x16;
20x20;
25x25 | 2,31
3,0
3,9
4,5 |
34. | 1 type screwed
T5K10, T115K6, BK8
|
| ГОСТ18885-73 | 20x12;
25x16;
32x20 | 2,1
3,0
4,05 |
35. | Through-pass blunts
P6M5
|
| ГОСТ18869-73 | 20x12;
25x16;
32x20 | 1,5
2,205
3,0 |
| ГОСТ18874-73 | 20x12;
25x16;
32x20 | 1,8
2,4
3,3 |
37. | Automate chisels:
-quadratic
-rectangular
-circular
|
| Factory-maker?s or customer's drawings | 4x4-25x25;L.to200
6x4-25x16;L.to200
Ф6-Ф20;L.to200
| 1,275 - 21
1,8 - 18,75
3,75 - 22.5 |
|